Artillery Sidewinder SW-X2 3D Printer
Artillery Sidewinder SW-X2 3D Printer
Sidewinder X2 Specification
Frame Material | Aluminum |
Control Board | Artillery Ruby 32-Bit |
Print Platform Material | Glass-Ceramic |
Heat Bed Type | AC Heat Bed |
Extruder Type | Titan Direct Drive Extruder |
Nozzle Type | Volcano |
Nozzle Diameter | 0.4mm |
Nozzle Temperature | 180℃ – 240℃ |
Layer Resolution | 0.1mm – 0.35mm |
XYZ Resolution | 0.05mm, 0.05mm, 0.1mm |
Print Size | 300x300x400mm / 11.81x11.81x15.75in |
Print Speed | 60mm/s – 150mm/s |
Connectivity | USB, TF Card, USB Stick |
Supported Filament | PLA, ABS, Flexible PLA, Wood, PVA, HIPS |
Filament Diameter | 1.75mm |
Calibration | Automatic Leveling |
- The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X2 comes 95% pre-assembled, which makes installation easy as can be.
- The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
- There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System greatly increase its printing stability.
- SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you've run out of filament, saving you time and money.
- With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X2 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds.