Artillery Genius Pro 3D Printer

  • $359.99
    Unit price per 
  • Save $30.01
Shipping calculated at checkout.
Buy 2 To Save 10% On PETG Filaments - use code: 2ORMORE


Artillery Upgraded Model - Genius Pro 3D Printer 98% Integrity with Printing Size 220x220x250mm

Artillery 3D Printer Genius Pro Technical Specifications

Build Volume 220x220x250mm / 8.66x8.66x9.84in
Product Size(L x W x H) 430x390x590mm / 16.93x15.36x23.23in
Package Size(L x W x H) 528x428x310mm / 20.79x16.86x12.21in
Product Weight 9.6kg / 21.17lb
Package Weight 11.7kg / 25.80lb
Layer Resolution 0.1mm - 0.35mm
Print Speed 60mm/s - 150mm/s
Travel Speed 250mm/s

Hot Bed Type

AC Hot Bed

Filament Diameter

1.75mm

Supported Filaments

PLA, ABS, Flexible PLA, Wood, PVA, HIPS

Calibration Type

ABL (Automatic Bed Leveling)

Extruder Type

Titan Direct Drive Extruder

Nozzle Type

0.4mm Volcano

Nozzle Heat Up Time

< 3 minutes

Hot Bed Heat Up Time

80°C in less than 2 minutes

 

 

  • Titan Direct Drive Extruder & Volcano Hotend -- The Titan direct drive extruder ensures smooth and fast feeding of the volcano nozzle for accurate layering of the printed 3d object and improve the print quality.

  • Synchronized Dual Z System -- The dual Z-axis design eliminates the weakness of uneven printing, because two Z-Axis stepper motors can ensure that the X-Axis rail moves parallel to the build plate.

  • Glass-Ceramic Print Platform & AC Heat Bed -- The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes.

  • Filament Runout Detection & Power Loss Detection and Recovery -- The Artillery 3d printer has the ability to recover from a power failure or brown-out and resume where it left off on the print! And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the filament has reached the end.

  • The Low-Noise System -- Thanks to the exclusive 32-bit motherboard and ultra-quiet stepper driver, there is almost no unpleasant noise when printing. This upgraded Genius Pro 3d printer is already 98% pre-assembled and only requires a couple of screws installed to hold the main rail assembly to the base.

     


    We Also Recommend